1 Kings 7:33

33 The wheels were made like chariot wheels; the axles, rims, spokes and hubs were all of cast metal.

1 Kings 7:33 in Other Translations

33 And the work of the wheels was like the work of a chariot wheel: their axletrees, and their naves, and their felloes, and their spokes, were all molten.

33 The wheels were made like a chariot wheel; their axles, their rims, their spokes, and their hubs were all cast.

33 and were similar to chariot wheels. The axles, spokes, rims, and hubs were all cast from molten bronze.

33 they were designed like chariot wheels. Everything - axles, rims, spokes, and hubs - was of cast metal.

33 And the work of the wheels was like the work of a chariot wheel: their axletrees, and their felloes, and their spokes, and their naves, were all molten.

33 The wheels were made like chariot wheels. The axles, rims, spokes, and hubs were all cast metal.

33 The wheels' design was similar to that of chariot wheels: their axles, rims, spokes, and hubs were all of cast metal.

33 The wheels were made like chariot wheels. All of the axles, rims, spokes and hubs were made out of metal.

1 Kings 7:33 Meaning and Commentary

1 Kings 7:33

And the work of the wheels was like the work of a
chariot wheel
In the same form and fashion as one of them; the Targum is,

``like a chariot of glory;''

a splendid one, curiously wrought; unless reference is had in it to the chariot of Ezekiel's vision:

their axle trees, and their naves, and their felloes, and their spokes,
were all molten;
cast together when the base was.

1 Kings 7:33 In-Context

31 On the inside of the stand there was an opening that had a circular frame one cubit deep. This opening was round, and with its basework it measured a cubit and a half. Around its opening there was engraving. The panels of the stands were square, not round.

32 The four wheels were under the panels, and the axles of the wheels were attached to the stand. The diameter of each wheel was a cubit and a half.

33 The wheels were made like chariot wheels; the axles, rims, spokes and hubs were all of cast metal.

34 Each stand had four handles, one on each corner, projecting from the stand.

35 At the top of the stand there was a circular band half a cubit deep. The supports and panels were attached to the top of the stand.