1 Kings 7:30

30 [There were] four bronze wheels for each of the stands, with bronze axles; the four support pedestals for these [were] under the basin, and the supports [were] decorated on each side [with] wreaths.

1 Kings 7:30 Meaning and Commentary

1 Kings 7:30

And every base had four brasen wheels, and plates of brass,
&c.] Flat pieces or planks of brass, on which the wheels stood, and not on the bare floor; so that these wheels seem only to serve as supporters, not to carry the laver from place to place, as is usually said; for they were not like chariot wheels, on two sides of the carriage, but set one at each square; and besides, when the lavers were placed upon them, they were fixed in a certain place, ( 1 Kings 7:39 )

and the four corners thereof had undersetters;
or "shoulders ^F1", or pillars, which were placed on the plates of brass the wheels were; and served with them to support the lavers when laid upon the bases, and so were of the same use as men's shoulders, to bear burdens on them:

under the layer were undersetters molten;
cast as, and when and where, the bases were, and the plates on which they stood; this explains the use they were of, being under the laver; these pillars stood at the four corners of the base:

at the side of every addition;
made of thin work, ( 1 Kings 7:29 ) they stood by the side of, or within side, the sloping shelves.

---

FOOTNOTES:

F1 (tptk) "humeri", Pagninus, Montanus

1 Kings 7:30 In-Context

28 Now this [was] the construction of the stands: there [were] frames for them and frames between the crossbars,

29 and on the frames which [were] between the crossbars [were] lions, oxen, and cherubim. On the crossbars both above and beneath the lions and oxen [were] works of cascading wreaths.

30 [There were] four bronze wheels for each of the stands, with bronze axles; the four support pedestals for these [were] under the basin, and the supports [were] decorated on each side [with] wreaths.

31 Its opening from [the] inside of the capital and above [was] a cubit; its pedestal [was] a round work of a cubit and a half; moreover, on its opening [were] the carvings with four-sided frames, not circular.

32 Four of the wheels [were] underneath the frames, and the axles of the wheels [were] on the stands. The height of each wheel [was] a cubit and a half.