1 Kings 7:23

The Molten Sea

23 He also made the Sea of cast metal. It was circular in shape, measuring ten cubits from rim to rim, five cubits in height, and thirty cubits in circumference. ^{[a] 1}

1 Kings 7:23 Meaning and Commentary

1 Kings 7:23

And he made a molten sea
A large vessel made of molten brass, which, because of the great quantity of water it held, is called a sea; as it was usual with the Jews to call a large collection of waters a sea, as the sea of Tiberius and Galilee. This was made by the man of Tyre, as the pillars, by the order of Solomon, and answered to the brasen laver in the tabernacle, only larger than that; and was not only for the priests to wash their hands and feet in, but to dip upon occasion, and by the Jews ^F16 is expressly said to be a dipping place for the priests, see ( 2 Chronicles 4:6 ) ,

ten cubits from the one brim to the other:
which was the diameter of it: it was round all about; spherical or circular; not as an hemisphere, as Josephus ^F17, and Procopius Gazaeus, but rather cylindrical:

and his height was five cubits;
from the bottom of it, not including the pedestal of oxen on which it stood:

and a line of thirty cubits did compass it round about;
this was the circumference of it; which answers to the diameter of ten cubits, or near it, a round number being given not strictly mathematical.

(Sceptics have ridiculed the Bible for saying that the mathematical constant (p) is 3 instead of the more precise 3.14159. (This number is an "irrational number" and needs an infinite number digits to specify it exactly.) Two explanations for the apparent lack of precision in the measurement are given.

1) The circumference given may be for the inside circumference and the diameter may be the diameter including the thickness of the rim. This would yield a very accurate mathematical result for the inside circumference of thirty cubits. The outside circumference would be about 31.4 cubits giving a rim thickness of four inches or an hand breadth agreeing with ( 1 Kings 7:26 ) .

2) In ( 1 Kings 7:26 ) we read the vessel "was wrought like the brim of a cup." That is the brim on the top of the vessel was wider than the main part of the vessel. The diameter would be given for the brim. If the brim or lip extended about four inches past the main body of the vessel then the outside circumference of the main part of the vessel would be exactly thirty cubits.

In each case the mathematical ratio for circumference of the circle is (p) d, where "d" is the diameter and (p) is the number 3.14159 ..... For a more complete discussion on this see the article by Russel Grigg. {r}. Editor.)

---

FOOTNOTES:

F16 T. Hieros, Yema, fol. 41. 1
F17 Antiqu. l. 8. c. 3. sect 5.
F18 "Does the Bible say pi equals 3.0?", Russell Greg, page 24, "Ex Nihil", March-May Issue, Vol. 17. No. 2., Creation Science Foundation Ltd. Brisbane, Australia.

1 Kings 7:23 In-Context

21 Thus he set up the pillars at the portico of the temple. The pillar to the south he named Jachin, and the pillar to the north he named Boaz.

22 And the tops of the pillars were shaped like lilies. So the work of the pillars was completed.

23 He also made the Sea of cast metal. It was circular in shape, measuring ten cubits from rim to rim, five cubits in height, and thirty cubits in circumference.

24 Below the rim, ornamental buds encircled it, ten per cubit all the way around the Sea, cast in two rows as a part of the Sea.

25 The Sea stood on twelve oxen, three facing north, three facing west, three facing south, and three facing east. The Sea rested on them, with all their hindquarters toward the center.

Cross References

• 1. (2 Chronicles 4:1–5)

Footnotes

• [a]. The Sea was approximately 15 feet from rim to rim, 7.5 feet in height, and 45 feet in circumference (4.6 meters from rim to rim, 2.3 meters in height, and 13.7 meters in circumference).