He also made ten movable stands of bronze; each was four cubits long, four wide and three high.
References for 1 Kings 7:27
This is how the stands were made: They had side panels attached to uprights.
On the panels between the uprights were lions, bulls and cherubim—and on the uprights as well. Above and below the lions and bulls were wreaths of hammered work.
Each stand had four bronze wheels with bronze axles, and each had a basin resting on four supports, cast with wreaths on each side.
References for 1 Kings 7:30
On the inside of the stand there was an opening that had a circular frame one cubit deep. This opening was round, and with its basework it measured a cubit and a half. Around its opening there was engraving. The panels of the stands were square, not round.
References for 1 Kings 7:31
The four wheels were under the panels, and the axles of the wheels were attached to the stand. The diameter of each wheel was a cubit and a half.
The wheels were made like chariot wheels; the axles, rims, spokes and hubs were all of cast metal.
Each stand had four handles, one on each corner, projecting from the stand.
At the top of the stand there was a circular band half a cubit deep. The supports and panels were attached to the top of the stand.
References for 1 Kings 7:35
He engraved cherubim, lions and palm trees on the surfaces of the supports and on the panels, in every available space, with wreaths all around.
This is the way he made the ten stands. They were all cast in the same molds and were identical in size and shape.