1 Kings 7:33-43 NIV

33 The wheels were made like chariot wheels; the axles, rims, spokes and hubs were all of cast metal.
34 Each stand had four handles, one on each corner, projecting from the stand.
35 At the top of the stand there was a circular band half a cubita deep. The supports and panels were attached to the top of the stand.

References for 1 Kings 7:35

    • v 7:35 - That is, about 3/4 foot (about 0.2 meter)
      36 He engraved cherubim, lions and palm trees on the surfaces of the supports and on the panels, in every available space, with wreaths all around.
      37 This is the way he made the ten stands. They were all cast in the same molds and were identical in size and shape.
      38 He then made ten bronze basins,1 each holding forty bathsb and measuring four cubits across, one basin to go on each of the ten stands.

      References for 1 Kings 7:38

        • w 7:38 - That is, about 230 gallons (about 880 liters)
          39 He placed five of the stands on the south side of the temple and five on the north. He placed the Sea on the south side, at the southeast corner of the temple.
          40 He also made the basins and shovels and sprinkling bowls.2 So Huram finished all the work he had undertaken for King Solomon in the temple of the LORD:

          References for 1 Kings 7:40

          41 the two pillars; the two bowl-shaped capitals on top of the pillars; the two sets of network decorating the two bowl-shaped capitals on top of the pillars;
          42 the four hundred pomegranates for the two sets of network (two rows of pomegranates for each network, decorating the bowl-shaped capitals3 on top of the pillars);

          References for 1 Kings 7:42

            • 23 7:42 - S ver 16; ver 20
              43 the ten stands with their ten basins;